Panasonic AJ-PX5100G, Руководство по эксплуатации

Страница: 252 / 263

– 252 –
Chapter 9 Maintenance — Warning system
r Storage
Message Description Measure
[CANNOT ACCESS CARD!] An error occurred while accessing the P2 card. Check the P2 card.
[CANNOT ACCESS TARGET!] An error occurred while accessing the connection target. Check the storage device status and connection.
[CANNOT COPY!][FORMAT
STORAGE DEVICE TO FAT]
The partition that can copy clips does not exist on the storage
device.
Reformat in FAT format, or export the P2 card to create a
partition.
[CANNOT FORMAT!] The storage device cannot be formatted. Change the connected storage device.
[CANNOT RECOGNIZE
STORAGE DEVICE!]
The storage device is not correctly recognized. Reboot the storage device or connect another storage device.
[CANNOT SELECT!][MAX. 6
PARTITIONS]
Storage devices with more than 6 partitions cannot be
selected (mounted simultaneously).
Release selected partitions.
[CARD IS EMPTY! CANNOT
COPY!]
The P2 card to copy is empty.
The copy operation is not performed because the card is
empty.
[FORMAT P2 CARD!] Cannot import to a P2 card containing clips. Format the P2 card.
[LACK OF CAPACITY!] Not enough space left on the storage device.
Use a new storage device with sufficient available space or a
formatted storage device.
[MISMATCH COMPONENT!]
The P2 card model number of the copy source and copy
destination do not match. Cannot copy.
Use the P2 cards of the same model number, or import on a
clip basis.
[STORAGE DEVICE
DISCONNECTED!]
The connection with the storage device is disconnected.
Reconnect the USB cable to the <USB3.0> terminal (host).
When it does not function normally after that, turn off the
power once and turn on the power again.
[TOO MANY PARTITIONS!] There are too many partitions.
The maximum number of partitions on the storage device is
23. Either reformat, or use a new storage device.
[UNKNOWN DEVICE
CONNECTED!]
A non-compatible DVD drive or other device is connected.
Change the connected device to the correct storage device,
and then turn the power off once and turn it on again.
[VERIFICATION FAILED!] The compare check performed after copying failed. Copy it again.