Panasonic AJ-PX5100G, Руководство по эксплуатации

Страница: 174 / 263

– 174 –
Chapter 6 Menu Operations — Menu list
[USER SW GAIN]
Item Description of settings
[S.GAIN] Selects the gain to enable to the <SUPER GAIN> switch (<USER> button).
[30dB], [36dB], [42dB]
Set to be valid/invalid per gain value. All gain values are valid in the factory settings.
[DS.GAIN] Selects the accumulated gain to enable to the <DS.GAIN> switch (<USER> button).
[6dB], [10dB], [12dB], [15dB], [20dB], [24dB], [28dB], [34dB]
Set to be valid/invalid per gain value. The gain value of [20dB] or lower is valid in the factory setting.
When [DS.GAIN] function is operating, the shutter mode is [OFF].
[LENS/IRIS]
Item Description of settings
[A.IRIS LEVEL] Sets the auto iris target value.
[0]…[100]
f Factory setting: [50]
[A.IRIS PEAK/AVE] Sets the ratio included in the peak for auto iris standard.
Larger ratios correspond to a peak within the IRIS detection window, and smaller ones correspond to
average values within the IRIS detection window.
[0]…[100]
f Factory setting: [30]
[A.IRIS WINDOW] Selects the auto iris detection window.
[NORM1]: Window that is near screen center.
[NORM2]:
Window that is near screen bottom.
[CENTER]: Window that is a spot in the screen center.
f Factory setting: [NORM1]
[S.IRIS LEVEL] Sets the super iris (backlight compensation) target value.
[0]…[100]
f Factory setting: [70]
[IRIS GAIN] Selects the IRIS GAIN adjustment side.
[CAM], [LENS]
f Factory setting: [LENS]
When using the lenses with extenders (such as x2 and x0.8) sold prior to the FUJINON DIGI POWER
types, set to [LENS] with the extender inserted, and operate IRIS correction control. If set to [CAM], the
IRIS control of the camera will no longer function correctly.
[IRIS GAIN VALUE] Selects the [IRIS GAIN] adjustment value.
When [CAM] is selected in [IRIS GAIN], this setting is enabled.
[1]…[20]
f Factory setting: [10]
[AGC]
Item Description of settings
[AGC] Selects [ON]/[OFF] for [AGC] function that automatically adjusts camera gain.
[ON], [OFF]
f Factory setting: [OFF]
[AGC LIMIT] Sets the maximum gain value during [AGC] operation.
[3dB], [6dB], [12dB], [18dB]
f Factory setting: [12dB]
[AGC POINT] Sets the F value to switch control to [AGC] from auto iris during [AGC] operation.
[F5.6], [F4.0], [F2.8]
f Factory setting: [F2.8]
[CLIP]
These items are used when performing various tasks, such as playing back, deleting, and copying clips, and editing metadata, while checking the
thumbnail of the clips displayed in the LCD monitor.
This menu item is enabled when the thumbnail screen is displayed.
Clip operations such as [DELETE] or [COPY] are enabled when the target thumbnail is selected.
Some items are displayed only in specific situations such as in USB storage mode or on the explorer screen.
[PROPERTY]
Item Description of settings
[CLIP PROPERTY] Detailed clip information is displayed on the screen. Items can be individually corrected. For details, refer
to “Properties” (page 140).
[CARD STATUS] Displays the card status of a card slot. For details, refer to “Thumbnail screen” (page 128).
[CPS PASSWORD] Sets the CPS encrypted password of the microP2 memory card.
[LOAD]: Loads CPS password from an SD memory card.
[SET]: Enters the CPS password.
[DELETE]: Deletes the password saved to the device, and disables encrypted formats.
[SD CARD] Displays SD memory card information.