141
Menu : Menu Description Tables
Me
n
u
The ____ in the Adjustable Range column indicates the
preset mode.
Menu Description Tables
SYSTEM SETTING
SYSTEM MODE
Items/
Data Saved
Adjustable
Range
Remarks
SYSTEM
MODE
1080i-59.94i
1080-50i
720-59.94P
720-50P
480-59.94i
576-50i
For setting the system frequency and the
recording format of the unit.
When this item is switched, turn “OFF”
the POWER switch on the unit and then
turn it “ON” again.
Notes
z
When the remote control unit (AJ-
RC10G) is connected, this item is not
displayed.
To switch this item, operate the main
unit independently.
z
When the time code is in free run
mode and a change is made to the
SYSTEM MODE menu option, the
time may not be correctly recorded.
After turning on the camera-recorder,
check the time code and make a
change to the setting if required.
z
When USB DEVICE mode is selected,
no change can be made to this option.
– C U F –
REC SIGNAL CAM
VIDEO
1394
SDI
Select video input signals.
CAM
:
Record the signal from the
camera
VIDEO:
Record the signal from the
GENLOCK IN connector (In SD
mode only
）
1394:
Record the signal from the 1394
input connector
SDI:
Records input to the SDI IN
connector (optional).
Notes
z
After the power has been turned OFF,
this setting defaults to CAM when the
power is turned ON again.
z
In order to select VIDEO and
synchronize video signals input to the
GENLOCK IN connector (VBS) with
the unit, set the GENLOCK item of
[GENLOCK] (page 145) to "EXT".
– C U F R
CAMERA
MODE
(1080-59.94i
/480-59.94i)
60i
30P
24P
24PA
(1080-50i
/576-50i)
50i
25P
(720-59.94P)
60P
30P
24P
(720-50P)
50P
25P
For setting the video system for
shooting.
S C U F R
ASPECT
16:9
4:3
Select the aspect ratio for recording. (In
SD mode only
）
16:9:
Record in <16:9> aspect ratio.
4:3:
Record in <4:3> aspect ratio.
– C U F R
Items/
Data Saved
Adjustable
Range
Remarks
VF TYPE
HD
SD
Specify the type of viewfinder to be
attached to the camera-recorder.
– C U F R
REC MODE
DVCPRO50
DVCPRO
DV
Select the recording mode.
(In SD mode
only
）
DVCPRO50:
Record in DVCPRO50 format.
DVCPRO:
Record in DVCPRO format.
DV:
Record in DV format.
– C U F R
SET UP
0%
7.5%A
Switch the setup.
(For 480-59.94i only
）
0%:
Setup is switched to 0% for both
the camera output and the
recording.
7.5%A:
Setup is switched to 7.5% for the
camera output and 0% for the
recording.
– C U F R
PC MODE
SELECT
USB HOST
USB DEV.
Specify the operation mode of the
camera-recorder when an external
device is connected via USB.
USB HOST:
Sets the camera-recorder to the mode
that allows an external hard disk drive
to be connected.
USB DEV.:
Sets the camera-recorder to the USB
device mode, which allows a PC to be
connected via USB 2.0 for use with
P2 cards as mass storage.
Note
When the PC MODE menu option is set
to ON, no change can be made to this
option.
– – –
F –
PC MODE
ON
OFF
Used to enable or disable the mode that
allows the camera-recorder to be
connected to a PC or an external hard
disk drive via USB 2.0.
ON:
Sets the camera-recorder to the
mode selected through the PC
MODE SELECT menu option.
OFF:
Disables the PC MODE for normal
operation.
Note
Once the power is turned off, the option
is always set to OFF when the power is
turned on next time.
– – – F –
AJ-HPX2100E(English).book 141 ページ ２００６年１１月２７日 月曜日 午後４時３４分
