67
Adjustments and Settings for Recording : Viewfinder Screen Status Displays
Adjus
tm
e
n
ts an
d Settin
g
s f
o
r
Recor
d
ing
* The menu option P2CARD REMAIN can be found in the <VF INDICATOR2> screen, which is accessible from the VF
page.
20. WHITE BAL switch
position
A
B
P
T
WHITE BAL switch positioned at [A].
WHITE BAL switch positioned at [B].
WHITE BAL switch positioned at [PRST].
ATW mode active. When brightness and color are outside operating limits,
the indication blinks.
21. Stored gain
indication
6
:
/10
:
/12
:
/15
:
/20
:
Storage gain (DS.GAIN) value (when active)
22. Gain value
¢¢
dB
Current gain value.
23. LINE MIX GAIN
display
M
This appears when LINE MIX GAIN (+6 dB) is active
24. Audio input channel
and level meter
- - - -
- - - - +
F
W
R
Selected channel together with its audio level.
AUDIO IN switch is positioned at FRONT.
AUDIO IN switch is positioned at W.L.(WIRELESS)
AUDIO IN switch is positioned at REAR.
25. Super black ON
B
Super black ON.
26. Super iris ON
S
Super iris ON.
27. Iris override
indication
+ +
+
(No indication)
–
– –
Correction phase of the iris override (when active)
+ + : On the open side by 1
+: On the open side by 0.5
– – : On the closed side by 1
–: On the closed side by 0.5
No indication : Standard status
28. Iris, F value
NC
OPEN
F1.7 - F16
CLOSE
Lens cable is not connected.
Lens iris is at maximum.
Lens iris value
Lens iris closed.
Note
These indications are provided when the lens is capable of indicating the iris
value. When the iris is being overridden, they blink.
29. Zoom indication
Z00 - Z99
Zoom degree is indicated. This indication is not provided for a lens that does
not return the zoom position, even if the indication is set to ON.
30. PRE RECORDING
indication/
SD memory card
remaining free space
(when MODE CHECK
is being performed)
P-REC (blink)
¢¢
h
¢¢
m
Indicated while pre-recorded video and audio are being recorded on the P2
card. If the USER switch is set to perform the PRE REC function, either “P-
REC OFF” or the specified duration “1s - 8/15s” is displayed when the PRE
RECORDING mode is switched by pressing the USER switch.
If a video encoder card (AJ-YAX800G, optional accessory) is attached, the
remaining free space on the SD Memory card will be displayed when the
MODE CHECK button is pressed during proxy recording.
31. Compression mode
COMP
This appears when setting the mode for suppressing distortion of
compressed video images that may occur when dark parts are shot. (in
720P mode only)
P2 Card Remaining Free Space/capacity Indication
Status of
unit
Recording
status
Menu option
P2 CARD REMAIN*
5.P2 card remaining free space
indication
6.P2 card remaining free space
indication (during MODE CHECK)
Under normal
conditions
Other than LOOP
REC mode
TOTAL
The total remaining free space of all
P2 cards loaded in the P2 card slots
is indicated in minutes.
Example: 30min
Not provided
ONE CARD
The number of the P2 card slot
holding the target P2 card, together
with that card’s remaining free space
indicated in minutes.
Example:
8min
Not provided
OFF
Not provided
Not provided
LOOP REC mode
TOTAL/ONE CARD
Indicated as [LOOP]
Not provided
OFF
Not provided
Not provided
During MODE
CHECK
Other than LOOP
REC mode
TOTAL/ONE CARD/
OFF
The total remaining free space and
capacities of all P2 cards loaded in
the P2 card slots are indicated in
minutes.
Example: 20/40
The number of the P2 card slot
holding the target P2 card, together
with that card’s remaining free
space, indicated in minutes.
Example:
8min
LOOP REC mode
Indicated as [LOOP]
The minimum guaranteed recording
time is indicated in minutes.
Example: 7min
Information Item
Indication
Status
[SD]
[1]
[1]
AJ-HPX2100E(English).book 67 ページ ２００６年１１月２７日 月曜日 午後４時３４分
