36
Adjustments and Settings for Recording : Multi Format
The unit employs a progressive scan (full pixel reading) CCD system.
With combinations of the SYSTEM MODE and CAMERA MODE menu options on the SYSTEM MODE screen on the
SYSTEM SETTING menu page, you can select a recording format from among 17 types including HD (1080i, 720P) and
SD formats.
In any recording format, the CCD operates in progressive (non-interlace) scan mode. In addition, through the REC
SIGNAL menu option, you can record external input signals such as 1394 and SDI (optional).
SYSTEM MODE menu option
Allows you to select a combination of system
frequency (59.94 or 50 Hz) and signaling system
(1080i, 720P, 480i, or 576i). When a change has been
made to the SYSTEM MODE option, the viewfinder
indicates “TURN POWER OFF.” Then, turn the
POWER switch of the camera-recorder off and wait
five seconds or longer before turning the camera-
recorder on again.
REC SIGNAL menu option
CAM
Signals from the camera are recorded. The
CAMERA MODE option allows you to select
a camera operation mode (frame mode).
1394
Signals from the DVCPRO/DV connector are
recorded. For information about the 1394
connection, see [Connection through the
DVCPRO/DV connector] (page 118).
VIDEO
Signals from the GENLOCK IN connector
are recorded when the camera-recorder is in
SD mode (480i-59.94i or 576i-50i).
SDI
Signals from the SDI IN connector are
recorded (when the AJ-YA350G, an SDI IN
option, is installed).
Notes
z
When VIDEO is selected, video may produce noise
if the signals from GENLOCK IN are non-standard
signals.
z
When SDI is selected, the time code or UMID
superimposed on SDI input signals are not
recorded.
CAMERA MODE menu option
Used to select a camera operation mode when the
option REC SIGNAL is set to CAM. For information
about the behavior for each setting, see [Recording
formats and output connector signal formats] (page
37) .
Note
When the camera has been switched from 60i, 60P, or
30P to 24P or 24AP, video may produce noise for a
moment because the pull-down five-frame cycle is
adjusted. This is not an abnormal condition.
REC MODE menu option
Used to select the recording format for the SD mode
(480i or 576i).
DVCPRO50
The DVCPRO50 format (50 Mbps) is used to
record video.
DVCPRO
The DVCPRO format (25 Mbps) is used to
record video.
DV
The DV format is used to record video.
ASPECT menu option
Used to select the aspect ratio for the SD mode (480i
or 576i)
16
：
9
The 16:9 aspect ratio is used to record video.
4
：
3
The 4:3 aspect ratio is used to record video.
Video system and Recording format
Selecting a recording signal and method
Adjustments and Settings for Recording
Multi Format
AJ-HPX2100E(English).book 36 ページ ２００６年１１月２７日 月曜日 午後４時３４分
