145
Menu : Menu Description Tables
Me
n
u
The ____ in the Adjustable Range column indicates the
preset mode.
GENLOCK
Items/
Data Saved
Adjustable
Range
Remarks
GENLOCK
INT
EXT
Switch the camera synchronising signal.
INT:
Synchronise with the internal
reference signal regardless of the
reference signal input to the
GENLOCK IN connector.
EXT:
Synchronise with the reference
signal input to the GENLOCK IN
connector.
– C U F E
GL PHASE
HD SDI
COMPOSIT
For selecting the output signals that lock
phases to the signals that are input in
the GENLOCK IN connector. (Only for
1080-59.94i, 1080-50i, 720-59.94P, or
720-50P
）
HD SDI:
For locking the HD SDI signals to the
GENLOCK input.
For the down converter output
signals, the start position of the video
delays by about 90 lines.
COMPOSIT:
For locking the down converter output
signals to the GENLOCK input.
For the HD SDI output signals, the
start position of the video gains by
about 90 lines.
– C U F R
H PHASE
COARSE
–50
:
+00
:
+50
Perform coarse phase adjustment for
horizontal hold when configuring a
system.
– – – – –
H PHASE
FINE
–160
:
+000
:
+160
Perform fine phase adjustment for
horizontal hold when configuring a
system.
Note
This adjustment simultaneously shifts
the SC phase.
– – – – –
1394 SETTING
Items/
Data Saved
Adjustable
Range
Remarks
1394 AUDIO
OUT
CH1/CH2
CH3/CH4
For selecting the channels for audio
signals output from the DVCPRO/DV
connector when the camera-recorder is
operating in DVCPRO or DV mode (for
480-59.94i or 576-50i only)
Note
When CH3/CH4 is selected, no sound is
heard in the following outputs:
z
EE output if the 25M REC CH SEL
menu option on the MIC AUDIO
screen on the MAIN OPERATION
page is set to 2CH.
z
Output of playback data recorded as
2-channel audio signals.
– C U F –
1394 SPEED
S100
S200
S400
For setting the transfer rate of signals
output from the DVCPRO/DV connector.
S100:
100Mbps
S200:
200Mbps
S400:
400Mbps
– C U F –
1394 IN CH
0
:
63
AUTO
For setting the input channel of signals
input to the DVCPRO/DV connector.
0 - 63:
To fix to the designated value
AUTO:
To follow the settings of the
externally connected devices
– C U F –
1394 OUT CH 0
:
63
AUTO
For setting the input channel of signals
output from the DVCPRO/DV connector.
0 - 63:
To fix to the designated value
AUTO:
To follow the settings of the
externally connected devices
– C U F –
1394
CONTROL
OFF
BOTH
For setting the control for recording
start/stop operations of external devices
that are connected to the DVCPRO/DV
connector.
OFF:
Do not control the externally
connected devices.
BOTH:
To control both the unit and the
externally connected devices
– C U F –
1394 CMD SEL REC_P
STOP
For setting the control of recording stop
operations of the external devices that
are connected to the DVCPRO/DV
connector.
REC_P:
Operation to pause recording
STOP:
Stopping operation
– C U F –
AJ-HPX2100E(English).book 145 ページ ２００６年１１月２７日 月曜日 午後４時３４分
