15
Parts and their Functions
：
Audio (output) Function Section
Par
ts a
nd t
hei
r Fun
ction
s
8.
FRONT AUDIO LEVEL (audio recording level
adjustment) control
This control adjusts the recording levels for Audio
Channels 1 and 2.
However, when the 3. AUDIO SELECT CH 1/CH 2
switch is set to “AUTO”, the level will adjust
automatically and the 2. AUDIO LEVEL CH 1/CH 2
knob and this knob will not be active.
The control can be enabled or disabled through the
menu options FRONT VR CH1 or FRONT VR CH2.
These options can be found in the <MIC/AUDIO1>
screen on the MAIN OPERATION page.
9.
AUDIO OUT connector (XLR, 5-pin)
This connector outputs audio signals recorded on
Channels 1/2 or 3/4.
Output signals are selected with the MONITOR
SELECT CH1/2 / CH3/4 selector switch.
10.
MONITOR SELECT (audio channel) CH1/2 /
CH3/4 selector switch
Use this switch to select the audio channel whose
signals are output to the speakers, earphones or
AUDIO OUT connector.
CH1/2:
Signals on Audio Channels 1 and 2 are
output.
CH3/4:
Signals on Audio Channels 3 and 4 are
output.
The channel indications on the display window and on
the audio level meter in the viewfinder are
synchronised with this selector switch.
11.
MONITOR SELECT (audio selection) CH1/3 /
ST / CH2/4 selector switch
The MONITOR SELECT switch is synchronised with
the audio signal output to the speakers and
earphones, and from the AUDIO OUT connector.
CH1/3:
Signal on Audio Channel 1 or 3 is output.
ST:
Stereo audio signals on Audio Channels 1
and 2 or Audio Channels 3 or 4 are output.
The stereo signals can be changed to mixed
signals using a menu option.
CH2/4:
Signal on Audio Channel 2 or 4 is output.
* You can select between stereo and mixed signal types
using the menu option MONITOR SELECT. This menu
option can be found in the <MIC/AUDIO2> screen on the
MAIN OPERATION page.
12.
MONITOR (volume) control
Used to control the volume of sound output from the
monitor speakers and earphones.
13.
ALARM (warning alarm volume adjustment)
Used to control the volume of the warning sound
emitted from 14. speakers or earphones connected to
the 15. PHONES jack.
If the control is minimised, no alarm is audible.
14.
Speakers
The speakers output EE sound during recording, and
reproduced sound during playback.
The speakers emit an alarm sound when the warning
lamp blinks and/or the indicator activates.
When the 15. PHONES jack is connected with
earphones, sound from the speaker is automatically
muted.
15.
PHONES (earphones) jack (mini jack)
This connector is designed for audio monitoring
(stereo) earphones. When earphones are connected,
sound from the speakers is automatically muted.
Both the front and rear connectors output the same
sound.
Audio (output) Function Section
Monitor
switch
MONITOR SELECT switch
CH1/2
CH3/4
CH1/3
Audio Channel 1
Audio Channel 3
ST
Stereo signals from
Audio Channels 1 and
2*
Stereo signals from
Audio Channels 3 and
4*
CH2/4
Audio Channel 2
Audio Channel 4
AJ-HPX2100E(English).book 15 ページ ２００６年１１月２７日 月曜日 午後４時３４分
