Panasonic 5000 Series Скачать руководство пользователя страница 96

Страница: 96 / 309

Starting a Guest Check

APPLICATIONS

•

This procedure can be used if your system is set up to operate under the

System-Assigned method.

•

When you use the Phone Number-Assigned method, the sequential order of

check numbers assigned by the system will not be interrupted.

•

If you use the Magnetic Card Reader to open Guest Checks, the phone

number-assigned Guest Check does not operate.

Magnetic Card Reader-Assigned Guest Checks

This procedure lets you use the Magnetic Card Reader to open new guest checks. The

procedure is very simple, although it does assume you have a guest card similar to your

employee card or server/cashier card with a magnetic strip.

Your server or cashier number should already be entered.

Press NEW CHECK.

Swipe the card through the reader.

[ Swipe Card ]

NEW

CHECK

Person Numbers & Seat Numbers

After you open the guest check, you can begin entering items. The 5000 system allows you

to separate the items by person or seat number. If you separate the items in your order,

you can later print a separate check for each person in the party. Even if you do not need

separate checks, these entries help expediters serve the order to the correct person.

You can track items by person number or seat number. Both procedures are basically the

same. With person numbers, you enter a Person # before you enter the items. With seat

numbers, you enter a Seat # before you enter the items. The primary difference concerns

the numbers you can enter.

With person numbers, you are limited to the number of guests you entered for this check.

With seat numbers, you can enter any numbers, as long as you do not enter more seats

than guests. If, for example, you enter '3' for the guest count, you can only use Person #1,

Person #2, and Person #3, but you can enter any three seat numbers.

Note: You can enter up to sixteen person numbers (Person #1-Person #16) or up to sixteen

seat numbers per guest check.

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

3-5

Содержание 5000 Series






















































































































































































































































































































Результаты поиска

Содержание 5000 Series

Отзывы:

Похожие инструкции для 5000 Series

Бренды по названию

Популярные бренды

Panasonic 5000 Series, Руководство по эксплуатации

Результаты поиска

Содержание 5000 Series

Отзывы:

Похожие инструкции для 5000 Series

Бренды по названию

Популярные бренды