Panasonic 5000 Series Скачать руководство пользователя страница 270

Страница: 270 / 309

PLU Program

MANAGER PROGRAMS

to the line (1-16) you need to change, then refer to the description for that line.

You can also press CSHR to move the cursor down, one line at a time.

[ line # ]

CSHR

Line 1:

Descriptor

Enter the PLU item name. Two lines, with 8-characters per line, are

available per item.

Line 2:

Status 1 Options

Note: You can list your options on-screen by pressing MENU LOOK-UP.

Enter the minimum number of modifiers or condiments (0-7)

required

for

this item. A '2' programmed here for a chicken dinner would force you to

enter at least two side dishes with the dinner. The Condiment Compulsion

option must also be set in Status 2.

B: 1= Require a Shift key (e.g., "Small" or "Large") for this PLU item.

2= This PLU price is subtracted from the customer total (subtracting PLU).

4= Add Tax 4 (for Canada Gross Sales Tax only).

C: 1= Add Tax 1 to this item.

2= Add Tax 2 to this item.

4= Add Tax 3 to this item.

D: 1= Disable this PLU item.

2= Enable red print for this item. (Availability depends upon your printer.)

4= Disable Tandem PLU print/display. Select this option only if you are

programming a Tandem PLU. This option may only disable the display,

depending upon your programming.

Line 3:

Status 2 Options

Note: You can list your options on-screen by pressing MENU LOOK-UP.

Require Double Shift for this item. If set, this item

requires

a single

shift (0-9) and a double shift (10-90) for each registration.

This PLU is Open (versus Preset).

This item acts as a Modifier/Condiment.

This item acts as a Memo Modifier/Condiment, which does not add to

the customer total and does not print on reports.

Allow Discounts to this item.

Inhibit use of Promo with this item.

Require a modifier/condiment with this item.

This item does not add to the customer itemizer.

Disable Receipt print.

Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0

5-51

Содержание 5000 Series






















































































































































































































































































































Результаты поиска

Содержание 5000 Series

Отзывы:

Похожие инструкции для 5000 Series

Бренды по названию

Популярные бренды

Panasonic 5000 Series, Руководство по эксплуатации

Результаты поиска

Содержание 5000 Series

Отзывы:

Похожие инструкции для 5000 Series

Бренды по названию

Популярные бренды