Panasonic 5000 Series, Руководство по эксплуатации

Страница: 90 / 309

Time & Attendance OPERATOR PROCEDURES
4. Check the data (name and job code) on your screen. If an error exists, press
CLEAR and start over. If everything is correct, press CLOCK IN.
[ employee # ]
[ job code # ]
CLOCK
IN
CLOCK
IN
Note: If you use employee cards, press CLOCK IN. Swipe the card through the Reader.
Enter your job code number and press CLOCK IN again.
*** TIME IN ***
#002 STEVE
MGR JOB 1
CSHR #1
NOV.15'94 0001
No1838 11:30 #01
Clock-Out
Use the Clock-Out procedure when you clock out at the end of a shift. If you are not
compensated for breaks, you may also use this procedure when you leave at the beginning
of a break.
1. Enter your employee number.
2. Press CLOCK OUT.
3. Make sure the displayed information is correct. If you entered the wrong number,
press CLEAR and start over.
4. If everything is correct, press CLOCK OUT again. If MGR Mode is required, turn
the keylock to MGR Mode before performing the steps below.
[ employee # ] [ verify information ]
CLOCK
OUT
CLOCK
OUT
Note: If you use employee cards, press CLOCK OUT. Run your card through the Magnetic
Card Reader. Then press CLOCK OUT again.
Panasonic 5000 Version 4.0 Operating Instructions - Rev. 2.0 2-59