PALAZZANI RAGNO TSJ 30.1, Руководство по эксплуатации и безопасности

Страница: 66 / 131

Tel. 0039 030 6857073 - Fax 0039 030657079 info@palazzani.it - www.palazzani.it
Pag. 58 OM3203_US
Fig. 3.8
3.11. LEVELING THE MACHINE
Depending on the different needs, the stabi-
lizers can be set-up on the ground with dif-
ferent positions, rotating their supports which
connect them to the chassis. Once the desired
position is decided, the pins must be inserted
in the appropriate
holes and the locking pin of the above men-
tioned supports to the chassis to maneuver the
boom (Fig. 3.8).
IMPORTANT
It’s important to consider the relationship between the working area and the
position of the stabilizers in order to stabilize the platform in the best way.
DANGER
In case of fl oors and basements, check if the slab capacity supports the pres-
sure on the stabilizer. This data is indicated in the sticker on every stabilizer.
If possible, the best stabilizers set-up is always the larger one, which allows a more ho-
mogeneous working area over 360°.
Now it is possible to position the stabilisers on the ground acting as following:
• select the control key part. 2 of fi g. 3.1 on the “stabilizers” symbol (right position)
• check the green lamp on the turntable, it must switched on, to confi rm that the boom
is in central, low and retracted position (Fig. 3.10).
• be sure that all stabilizers pins are correctly inserted (Fig. 3.8).
• set the selector n°10 di fi g. 3.3 on the needed set-up mode.
fi g 3.10a
• if the stabilization is set on automatic, just
operate the lever part. 1 of fig. 3.4 in down
direction stabilizers. The stabilizers will
begin to descend until the machine is com-
pletely leveled. By holding down the green
button (fig 3.10a) and activating the radio
control lever 1 in fig 3.4, the machine will
automatically begin to rise up to the maxi-
mum permitted height without leveling.