manualshive.com logo in svg

PALAZZANI RAGNO TSJ 30.1, Руководство по эксплуатации и безопасности

Поделиться
Скачать
PALAZZANI RAGNO TSJ 30.1 Скачать руководство пользователя страница 25

Fig. 2.2

Tel. 0039 030 6857073 - Fax 0039 030657079           [email protected] - www.palazzani.it

Pag.  16

OM2016_US

 !

WARNING

Before completing the stabi-
lising maneuver, check that 
the platform is perfectly le-
veled - 2° max. slope is ad-
mitted, as per fi g. 2.2 (the 
bubble must be positioned 
inside the external ring).

 

DANGER

Before approaching base-
ments or attic fl oors,  verify 
if platform weight and legs 
pressure can be supported.

 

DANGER

Before moving the boom, ve-
rify that nobody is under the 
platform working area. 
For long term operations or 
where it is possible, delimita-
te the area where the machi-
ne boom operats with some 
chains and indications plates.

 !

WARNING

Before using the platform, verify the level of the battery. 

 !

WARNING

Before using the platform, verify the correct functioning of the safety devi-
ces. Inform the technical responsible in case of noise, vibrations or anoma-
lous machine behaviours. 

 

DANGER

Never use the platform as an elevator or to handle persons to different fl o-
ors.

Fig. 2.3 

Содержание RAGNO TSJ 30.1




































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды