PALAZZANI RAGNO TSJ 30.1 Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 131

background image

Tel. 0039 030 6857073 - Fax 0039 030657079 [email protected] - www.palazzani.it

Pag. 34

OM2016_US

2.8.7.

Circuits failure

Because of possible faults, the circuits / control components, the safety components and
the power components can partially lose their effi cacy with a consequent lowering of
the security level:
• periodically check the functioning status of the machine devices/components.

2.8.8.

Lighting

The operator must provide an adequate lighting system on the areas of maintenance of
the machine and comply with the local laws in force and according to the Directives.
In case of power failure, it is recommended an average illuminance of at least 400 lux.
If, for particular and rare maintenance operations, additional lighting may be necessa-
ry, also taking into account the extremely rare nature of these operations, it will be the
user’s responsibility to provide by means of portable safety lamps (powered at 24 Vdc ,
not included in the supply).

No standard ligthening is supplied with the machine.

2.8.9. Risk of heating / burning

Due to the temperature present on engines there is a potential risk of burn during the
normal use and in particular during their maintenance operations.
• Inform the maintenance staff about the maintenance activities or machine use.
• Access those areas waiting the above mentioned parts cooling before and with pro-

per protecting gloves, with the max attention.

2.8.10. Risks due to movement

The machine loading/unloading operations by means of lifting equipments, from contai-
ner to the box, expose the operators to the risks of suspended loads or crush.
Those operations must be executed exclusivally by specialized staff for lifting equipments
use, properly trained on that scope.

WARNING
Before operating, read carefully chapter 3 of the manual

2.8.11. Risks for the exposed persons

The exposed persons are third persons not engaged in the machine operation, therefore
persons working near the machine or visitors.
During the machine use and maintenance, fence all the working area exposing eventual-
ly prohibiting plates

STOP
Keep exposed persons at a safety distance from the dangerous areas

«
...
41
42
43
44
45
...
»

Содержание RAGNO TSJ 30.1




































































































































Отзывы:

Нет отзывов

Похожие инструкции для RAGNO TSJ 30.1

Бренд: Fein Страницы: 248

Бренд: ZF Страницы: 30

Бренд: Raymarine Страницы: 111

Бренд: Badger Meter Страницы: 16

Бренд: Cameo Страницы: 64

Бренд: Cameo Страницы: 100

Бренд: CAME Страницы: 32

Бренд: Xo Страницы: 59

Бренд: Falcon Страницы: 8

Бренд: Quark-Elec Страницы: 2

Contrology Cadillac

Бренд: Balanced Body Страницы: 7

Бренд: M-Audio Страницы: 48

Бренд: M-Audio Страницы: 19

Бренд: M-Audio Страницы: 17

Бренд: M-Audio Страницы: 18

Бренд: M-Audio Страницы: 12

Бренд: M-Audio Страницы: 20

MIAMI J ADVANCED

Бренд: Össur Страницы: 35

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды