manualshive.com logo in svg

PALAZZANI RAGNO TSJ 30.1, Руководство по эксплуатации и безопасности

Поделиться
Скачать
PALAZZANI RAGNO TSJ 30.1 Скачать руководство пользователя страница 20

Tel. 0039 030 6857073 - Fax 0039 030657079           [email protected] - www.palazzani.it

Pag.  11

OM2016_US

2.  

SAFETY 

PRECAUTIONS

2.1.   GENERAL SAFETY INFORMATION
The user has the responsibility to provide the personnel all necessary instructions about 
any possible accident risks, safety devices and general rules about safety in accordance 
with the EU directives and Country laws where the machine is used.
The authorized personnel must know all position and functioning controls and machi-
ne characteristics.
This manual has to be read totally, as well as all attachment which are part of the ma-
nual.

In case of any doubt on the correct instructions understanding, contact the manu-
facturer PALAZZANI INDUSTRIE S.p.A. to get the needed explanations.

ALL PERSONS OPERATING WITH THE MACHINE MUST READ 
THE INFORMATION IN THIS MANUAL CAREFULLY AND UN-
DERSTAND, IN PARTICULAR THE SAFETY INSTRUCTIONS LI-
STED IN THIS CHAPTER.

DANGER

TAMPERING OR NOT AUTHORIZED SUSBTITUTION OF ONE 
OR MORE PARTS OF THE MACHINE, THE USE OF EQUIPMENTS 
WHICH MODIFY THE MACHINE USE AND SPARE PART REPLA-
CED WITH DIFFERENT MATERIALS FROM THE SUGGESTED 
ONE CAN CAUSE ACCIDENT RISK AND ARE FORBIDDEN

WARNING

When the operator performs any movement of the machine, there is a 
system response delay of about 0.5 seconds.

Содержание RAGNO TSJ 30.1




































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды