manualshive.com logo in svg

PALAZZANI RAGNO TSJ 30.1, Руководство по эксплуатации и безопасности

Поделиться
Скачать
PALAZZANI RAGNO TSJ 30.1 Скачать руководство пользователя страница 124

Tel. 0039 030 6857073 - Fax 0039 030657079           [email protected] - www.palazzani.it

Pag.  96

OM6010_US

 !

WARNING
THE ILLEGAL DISPOSAL OF THE PRODUCT BY THE HOL-
DER LEADS TO THE APPLICATION OF THE ADMINISTRA-
TIVE SANCTIONS PROVIDED FOR BY THE REGULATIONS 
IN FORCE.

 !

WARNING
IF THE SYMBOL OF THE BARRED BIN IS NOT PRESENT ON 
THE EQUIPMENT, IT MEANS THAT THE DISPOSAL OF THE 
PRODUCT ITSELF IS NOT THE MANUFACTURER’S RE-
SPONSIBILITY. IN THIS CASE THE REGULATIONS IN
FORCE ON THE DISPOSAL OF WASTE ALWAYS APPLY. 

6.2.3.  

DEMOLITION

The machine is built with materials that do not present, for the effects of demolition, 
particular safety aspects towards humans, more precisely:
•  Steel: all the machine parts like boom, supports, base, structure ecc..
•  Plastic: lamps and button bodies, tracks / wheels and other electrical components.
•  Glass: display and lamps.
•  Copper: cables and boards.
•  Lead / acid batteries for the starting or for travelling.

According to the CE directives or according to the laws in force in their country, the 
user must take care of the disposal and elimination of the materials making up the 
machine for the conservation and protection of the environment. Before demolishing 
the machine, the user must communicate all the data shown on the identifi cation plate 
to the manufacturer.
For scrapping the machine or parts of it, you should take all safety precautions necessary 
to avoid the risks associated with decommissioning.
In particular, special precautions should be taken during the steps of:

•  Trasport and handling.
• Dismantling.
•  Separation of materials.
For the operations of separation of materials and their recycling or their disposal, it is 
necessary to refer to the National and Regional Laws regarding the disposal of solid 
industrial waste and dangerous substances.

Содержание RAGNO TSJ 30.1




































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды