PALAZZANI RAGNO TSJ 30.1 Скачать руководство пользователя страница 35

Страница: 35 / 131

Tel. 0039 030 6857073 - Fax 0039 030657079 [email protected] - www.palazzani.it

Pag. 26

OM2016_US

2.5.

IMPROPER

USE

• If not explicitly indicated by the customer and indicated in the Use Manual, it is

forbidden to use the platform as a crane, with or without the connected cage

• The strains induced to the frame due to the weigh lifting may cause serious dama-

ge to the parts and affect the arms stability itself or the chains endurance.

• It is forbidden to drive the platform, if the boom is not lowered on its rest position.

The machine stability may be seriously affected.

• Any

modifi cation of the speed of the booms movements is forbidden, in order to

avoid vertical and horizontal accelerations exceeding the designed ones

• It is forbidden to mount any superstructure (fl ags, posters) in the cage, increasing

the resistance to the wind in the aerial cage which could overturn or collapse the
machine

• It is forbidden to extend the telescopic booms if the wind speed is over 12.5 m/s

(45 km/h)

DANGER

Avoid any contact against fi xed, or mo-
bile structures (buildings, ect..) or mo-
ving objects (cars, ect...)

DANGER

Never exceed the max admitted safe
working load, avoid to load material du-
ring work condition.
The use of the platform as a crane is for-
bidden, if not expressly indicated by the
manufacturer.

DANGER

Do not modify the electro hydraulic plant or the regulations to get higher
performances.

Fig. 2.10

Содержание RAGNO TSJ 30.1




































































































































Результаты поиска

Содержание RAGNO TSJ 30.1

Отзывы:

Бренды по названию

Популярные бренды

PALAZZANI RAGNO TSJ 30.1, Руководство по эксплуатации и безопасности

Результаты поиска

Содержание RAGNO TSJ 30.1

Отзывы:

Бренды по названию

Популярные бренды