PALAZZANI RAGNO TSJ 30.1, Руководство по эксплуатации и безопасности

Страница: 61 / 131

Tel. 0039 030 6857073 - Fax 0039 030657079 info@palazzani.it - www.palazzani.it
Pag. 53 OM3203_US
3.6. PLATFORM SELFPROPELLING
To travel follow these instructions:
• Turn on the engine from the main panel (Part 1 Fig. 3.1)
• Turn the key of the control selections (Part 2 Fig. 3.1) on turntable symbol (cen-
tral position)
• Activate the radio connection between transmitter and receiver (note on a fi g.3.2)
• Use the left and right joystick (Part 1 and 6 Fig. 3.2) to control the tracks.
• It is possible to rotate the machine on itself, actioning the two above mentioned
levers in opposite direction, one forward and the other backward
• transfer always with tracks in enlarged position. Use the narrow position only to
pass through corridors or narrow spaces and fl at grounds
It is possible to intervene on the transfer speed of the equipment in two different ways:
1) increasing the rpm througth the selector 14 Fig. 3.2
2) actioning the selector 13 Fig. 3.2: in central position the speed is high, while on the
left side the tracks motors displacement is reduced. Keep the selector 13 of Fig. 3.4 on
the left side to make the steering easier.
!
WARNING
It is forbidden to travel with people or loads in the basket.
!
WARNING
“Rabbit” option corresponds to the max speed and it’s for long transfer on
fl at grounds and free from obstacles.
“Snail” option corresponds to the min speed, which can be always switched
to the fast speed, and it’s for transfer on slopes, indoor or on paths with ob-
stacles (i.e. inside a workshop or a museum, etc).
IMPORTANT
Always face both the ascent and the descent with the arm facing uphill and
slow down when passing the bump to avoid sudden oscillations of the extre-
mity of the arm.
IMPORTANT
During transfer in an area opened to traffi c, it is necessary to install a “wor-
king site” with skittles or barriers, to avoid collisions when the machine is
not equipped with signaling devices.