PALAZZANI RAGNO TSJ 30.1, Руководство по эксплуатации и безопасности

Страница: 65 / 131

Tel. 0039 030 6857073 - Fax 0039 030657079 info@palazzani.it - www.palazzani.it
Pag. 57 OM3203_US
Information
The system can interrupt the boom manuveurs automatically, in this case on the
display it will appear the written “anticollision active” (Fig 3.6) followed by the
orange light (in the turret Fig 3.7) and by a fi xed sound. In the “active booms
anticollision” phase to move the boom it is necessary to action at the same time
also the button of automatic closing on the radiocontrol (Fig. 3.7a).
Fig 3.6
Fig 3.7
Fig. 3.7a
DANGER
Transfer with the lifted boom only on fl at fl oor and with slow speed. Do not
transfer on slopes even if slight slope.
Function 2
There are situations in which it may be necessary to lower the stabilizers, on some
models, also to reduce the maximum height, or when dealing with very steep terrain.
In the latter case, it may be useful to lower the stabilizers up to a few centimeters from
the ground, because due to the forces of inertia, if the machine loses stability, the sta-
bilizers rest on the ground avoiding its overturning.
Normally the stabilizers movement is allowed only when the articulations pins are in-
serted, or when this selector is activated.
To move the stabilizers without pins, follow these instructions:
• turn on the diesel engine
• check the key selector (Part 2 Fig. 3.1) it’s to be in “stabilizers” position on the
right
• check the green light on the turntable, this means that the boom is in centeres
position, lowered and retracted
• press the FN button on the panel (Part 9 Fig. 3.1) and at the same time move the
stabilizers like a normal situation (using the control proportional lever and the
stabilizers joysticks which must be moved).