Palax KS45S, Руководство пользователя

Страница: 21 / 38

21
Palax KS45s Translation 1-2017
3.10. In-feed conveyor, Fig. 3.5 and 3.6

The hydraulically driven in-feed conveyor is 350 mm wide and 2600 mm long.

The drive and return rollers of the in-feed conveyor are equipped with scrapers A, Fig. 3.5,
which keep the rollers clean at all times. For example, in winter snow does not pack on the
rollers.

Both ends of the in-feed conveyor can be adjusted. Figs. 3.5 B and 3.6 A.
NOTE ! The infeed conveyor belt is a wear-part, but using the belt in an appropriate manner,
considerably increases its service life.
How to use the belt

Do not pull trees from the ground using the belt, because the belt wears quickly if it slips
under the tree.

Stop the infeed operation immediately when the tree comes in contact with the log-stop.

Use a log-stand equipped with freely rotating rollers or hydraulic operation to make handling
of the trees easier.

Always keep the belt at a suitable tightness.

Make sure that the belt does not chafe against the edges of the deck, and adjust as
necessary.

While replacing the belt, make sure that the new belt rotates in the right direction.
3.11. How the safety features affect the operation of the machine

The machine is equipped with devices that ensure operational safety. The safety-related
devices affect the operation of the cover for the splitting area, the saw-bar and the pusher.

The protective net for the splitting chute must be closed so as to enable the cutting and
splitting operations.

Once the protective net is opened, the pusher returns to its rear position, and the operation of
the hydraulic valves is prevented.
Warning!

All the safety-related devices are necessary to ensure a sufficient level of safety.

Do not remove any of the safety features from the machine. The machine operator is
responsible for the flawless operation of the safety-related devices.