Palax KS45S, Руководство пользователя

Страница: 16 / 38

16
Palax KS45s Translation 1-2017
2.4. Bringing the conveyor into the work position, Figs. 2.6, 2.7, 2.8 and 2.9

Pull down the conveyor and leave it supported by the
winch ropes and the tip wheel. Remove the conveyor
chain holder from under the conveyor.

Lock the conveyor in the work position by means of
the cotters. Fig. 2.7
Bringing the conveyor into the transport position

Bringing the conveyor into the transport position is
done in the same manner as bringing it into the work
position, but in reverse order.

NOTE! Only lift the conveyor when it has been swung
to the centre position! When it is lifted up, the conveyor
must always be in the centre position. If the conveyor is in
a swung position while lifted up, it may hit the surrounding structures and get damaged.

While the conveyor is in the transport position,
the locking cotters can be kept behind the locking
pin. Fig. 2.8, 1.

In the transport position, the conveyor must be
locked into place using the chain. Hook the chain in
the slot in the winch stand. Fig. 2.9