Palax KS45S, Руководство пользователя

Страница: 2 / 38

2
Palax KS45s Translation 1-2017
Contents
1. Oberview ...................................................................................................................................... 4
1.1. Foreword ............................................................................................................................... 4
1.2. EU Declaration of Conformity ............................................................................................... 5
1.3. Intended use of the machine ................................................................................................ 6
1.4. Warning signs ........................................................................................................................ 6
1.5. Nameplates ........................................................................................................................... 9
1.6. The main dimensions and models of the machine ............................................................... 9
1.7. Safety instructions ............................................................................................................... 10
1.8. Noise emission and vibration .............................................................................................. 11
1.9. Responsibilities of the operator .......................................................................................... 11
1.10. Operating conditions ....................................................................................................... 11
1.11. Terms of warranty ........................................................................................................... 12
1.12. Operating instructions for the winch .............................................................................. 12
2. Acceptance and setting up the machine for operation ............................................................. 13
2.1.
State of delivery and acceptance control............................................................................ 13
2.2. Topping up hydraulic oil, Fig. 2.4 ........................................................................................ 15
2.3.
Checking and topping up the saw-chain oil, Fig. 2.5 ........................................................... 15
2.4. Bringing the conveyor into the work position, Figs. 2.6, 2.7, 2.8 and 2.9 .......................... 16
2.5.
Bringing the in-feed conveyor into the work position, Fig. 2.9........................................... 17
2.6. Lifting and moving the machine, Figs. 2.10, 2.11 ................................................................ 17
3. Using the firewood processor, description of operation ........................................................... 18
3.1. Operating controls, Figs. 3.1 ............................................................................................... 18
3.2. Setting up the machine for operation ................................................................................. 18
3.3. Testing the machine ............................................................................................................ 18
3.4. Electric drive, start and emergency stop. ........................................................................... 19
3.5. Starting the electric motor using the Y/D starter, Fig. 3.2 .................................................. 19
3.6. Emergency stopping of an electrically powered machine, Fig. 3.2 ..................................... 19
3.7. Powered by tractor.............................................................................................................. 20
3.8. The machine is equipped with a system to prevent simultaneous operation in two modes,
Fig. 3.3 ............................................................................................................................................ 20
3.9.
Adjusting the log length, Fig. 3.4 ......................................................................................... 20
3.10. In-feed conveyor, Fig. 3.5 and 3.6 ................................................................................... 21
3.11.
How the safety features affect the operation of the machine ....................................... 21
4. Use of the firewood processor, crosscut operation .................................................................. 22
4.1.
During the operation ........................................................................................................... 22