Palax KS45S, Руководство пользователя

Страница: 19 / 38

19
Palax KS45s Translation 1-2017
3.4. Electric drive, start and emergency stop.

The power output of the motor is 22 kW and the speed is 1500 rpm.

The machine is equipped with an automatic Y-D starter with an emergency stop feature.

All the electric installations have been made ready.

The cross-section of the extension cord required for a tension of 400 V must be 10 mm2.

When starting up the machine, check that the direction of rotation corresponds to the arrow
on the blade cover.

To check the direction of rotation, run the motor for a short while and then stop it suddenly.

The machine may only be connected to a power supply equipped with a fault current switch of
30 mA.

The machine must be equipped with a 5-pole extension cord (L1, L2, L3, N ja PE) to operate.
NOTE ! Electric work may only be carried out by a professional person.
3.5.
Starting the electric motor using the Y/D starter, Fig. 3.2

Press the start button A. In the Y-position the motor starts rotating at slow speed with low
output. The start phase takes several tens of seconds.

As the engine speed increases, the D-position is automatically switched on and the motor
quickly reaches full speed.

At the same time, the signal light B between the pushbottons illuminates.

Stop the engine using the pushbutton C.

The switch E is for the heater carpet of the hydraulic oil tank (optional).
NOTE ! The machine must not be
operated until the motor is running at full
speed.
3.6.
Emergency stopping of an
electrically powered machine,
Fig. 3.2

Push down the emergency stop button D.

Turn the pushbutton clockwise to release it.

The emergency stop button can be locked by
a key. The locking prevents the use of the
machine