Palax KS45S, Руководство пользователя

Страница: 31 / 38

31
Palax KS45s Translation 1-2017
6.5. Detent end of valve

There is a small hole in the middle of the end plate of
the detent end of the valve for spraying lubricant
onto the moving parts of the valve.

Only use oil that does not congeal in frost.

The easiest way is to use a spray bottle with a nozzle
and pipe.

Insert the spray pipe in the hole and press 2-3 times
for about 1-2 seconds at a time.

The oil spreads smoothly on the moving parts of the
detent end.
NOTE ! Do not use Vaseline spray because this
congeals in severe frost and the valve will not then
operate properly.
6.6. Lubricating the spool shifter

The spool shifter is equipped with a pin and a ball
joint that require regular maintenance and
lubrication.
1. Lift up the edge of the protective rubber of the
spool shifter.
2. Spray lubricant on both sides of the pin and down
on the ball joint.
3. At the same time, check that the rubber is intact.