PACOM 16-Channel Скачать руководство пользователя | Manualshive

Страница: 77 / 84

background image

Digital Video Recorder

69

⑤

Click the screen format to select the desired display mode. When changing the screen format, the selected
camera on the current screen will be located in the first cell of the new layout.

⑥

Click the camera button to select the camera to be viewed.

⑦

Click the to adjust the brightness, contrast, saturation and hue of monitoring image.

⑧

Click the

to control pan, tilt and zoom of the camera from a remote site.

⑨

Click the

to control alarm out devices at the remote site.

⑩

Click the

to save the current image as a bitmap or JPEG file format.

⑪

Click the

to set up the image drawing mode and OSD display. You can adjust the display speed by changing

the image drawing mode, and select OSD information to be displayed on the screen.

⑫

The event status window at the bottom displays a list of events that were detected from the remote site.

⑬

Selecting a camera on the screen and clicking the right mouse button displays the text menu screen.



Change Camera Title

: Changes the camera name.



Enable Audio

: Enables audio communication with the remote site. When the audio control

panel displays, click the   to send audio to the connected remote site and click the button
again to stop sending audio. Click the   to monitor live audio from the connected remote
site through the attached speaker and click the button again stop monitoring live audio.
Clicking both   and   allows two-way communication. Clicking the   disables audio
communication.



Aspect Ratio

: Changes the image aspect ratio.



Deinterlacing:

Using a deinterlace filter for interlaced video enhances image display quality

by eliminating horizontal scan lines and noise in areas with motion.



Anti-Aliasing Screen

: Enhances image display quality by eliminating stair stepping

(aliasing) effects in the enlarged image.

NOTE: A camera name change in the Web Watch mode does not affect the camera name set up on the remote

site. Leaving the Camera Title blank causes the camera name set up on the remote site to display.

The

icon will display on each camera screen when audio communication is available between the

WebGuard system and a DVR.

Web Search

Mode

WebSearch is a remote web search program that allows you to search recorded video on the remote DVR.

NOTE: The remote site connection in the Web Search mode will automatically be disconnected if there is no

activity for 30 minutes.

«
...
75
76
77
78
79
...
»

Содержание 16-Channel





















































































Отзывы:

Нет отзывов

Похожие инструкции для 16-Channel

QQTT442288--440033

Бренд: Q-See Страницы: 13

Бренд: EverFocus Страницы: 171

Бренд: Speco Страницы: 110

Бренд: Okina USA Страницы: 11

Бренд: U.S. Security Solutions Страницы: 8

Бренд: Provision ISR Страницы: 74

Бренд: Provision ISR Страницы: 81

Бренд: Advanced Technology Video Страницы: 2

QuadraSplit 421SS

Бренд: Advanced Technology Video Страницы: 8

Бренд: UNIMO Technology Страницы: 13

Video Surveillance DVRs

Бренд: Viewtron Страницы: 51

Бренд: Brandoo Team Страницы: 32

Easy Link PRO EL1622

Бренд: Kguard Страницы: 105

Бренд: Kguard Страницы: 113

Бренд: VC Videocomponents Страницы: 28

Бренд: VC Страницы: 44

Бренд: Kollector Страницы: 82

Бренд: Swann Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды