PACOM 16-Channel, Руководство пользователя

Страница: 43 / 84

Digital Video Recorder
35
Highlighting boxes under
Dwell
and pressing the button allows you to set the length of time you would like to record
for the associated event. (Advanced Mode Only)
Pre-Event
Highlight
Pre-Event
in the Record menu and press the button, and the
Pre-Event
setup screen appears. If you do
not have Event set up in the Record Schedule, a message will display alerting you to this fact.
Figure 44 — Pre-Event setup screen.
When the DVR is in the Event Record mode it is possible to
have it record images before the event occurs. The
Pre-Event
screen allows you to define how to handle pre-event recording.
You can turn individual cameras On or Off for pre-event
recording. The image speed can be set from 1.00 to 30.00 ips
(25.00 ips PAL), image quality can be selectable from
Very
High, High
,
Standard
and
Basic
, and image resolution can
be selectable from
Very High (D1)
,
High (Half D1)
and
Standard (CIF)
.
You can set the amount of time to record prior to the event
by adjusting the
Dwell
. You can set the
Dwell
from 5 seconds
to 30 minutes. The longer the dwell set, the fewer maximum
ips can be set.
NOTE: When the DVR is in the Time or Time & Event mode, it ignores the pre-event settings and follows the
time settings.
Event Setup
Figure 45 — Event menu.
Alarm-In
Highlight
Alarm-In
in the Event menu and press the button. The
Alarm-In
setup screen appears.
Figure 46 — Alarm-In Settings screen.
The alarm terminal strip on the back of the DVR has inputs
associated with each alarm. You can set up each input on the
Alarm-In
screen. You can turn each input On or Off by
highlighting the alarm number and pressing the button.
Each input can be given a title. Highlight the desired Title
box and press the button. A virtual keyboard appears
allowing you to enter a title name.
Each input can be set as
NO
(normally open) or
NC
(normally
closed).