PACOM 16-Channel, Руководство пользователя

Страница: 70 / 84

User’s Manual
62
Selecting
A–B Clip-Copy
in the Search – Export menu or pressing the
CLIP COPY
button during playback will set
the starting point of the video to be clip copied, and the icon displays at the bottom-left corner of the screen. Selecting
A–B Clip-Copy
in the Search – Export menu or pressing the
CLIP COPY
button again will set the ending point of the
video to be clip copied by displaying the
Clip-Copy
screen.
Pressing and holding the
CLIP COPY
button for more than three seconds while in the Search mode or Live Monitoring
mode initiates the One-Touch Clip Copy function. The last recorded image will be the ending point of video to be
clip copied, and the system will automatically begin to calculate the possible video data size that the selected storage
media can handle.
Select
Clip-Copy
in the Search – Export menu or press the
CLIP COPY
button while in the Search mode or Live
Monitoring mode, and the
Clip-Copy
screen appears to allow clip copy setup.
Figure 79 — Clip-Copy screen.
You can search video from the first to last recorded images, or you can
set the start and stop times and dates.
Highlight the box beside
From
and press the (Play/Pause) button to
toggle between On and Off. When set to Off, you can enter a specific
Date and Time. When set to On, the search will be from the first recorded
image. When highlighting and pressing the
button the bookmark
list displays and the bookmark point you selected will be the starting date
and time.
Highlight the box beside
To
and press the button to toggle between
On and Off. When set to Off, you can enter a specific Date and Time.
When set to On, the search will be from the last recorded image. When
highlighting and pressing the
button the bookmark list displays and
the bookmark point you selected will be the ending date and time.
Highlight the box beside
Channels
and press the button. You can select the cameras that you would like to include
in your video clip.
Highlight the box beside
Password
and press the button. A virtual keyboard appears allowing you to enter the
password for reviewing the video clips.
Highlight the box beside
Dest.
and press the button. You can select the storage device on which you would like to
record the video clip. You can choose from
Internal DVD RW
and
USB Storage
.
CAUTION: The USB device for clip copy must be FAT 16 or FAT32 format.
NOTE: While copying video clips on the DVD RW, the recording speed might decrease.
While copying video clips on the DVD RW, the DVR will stop archiving video data until clip copy is finished.
When the error message “Firmware update of the optical drive is required” displays, update the firmware
of the installed DVD RW drive. Please follow the instructions described in Chapter 3 – Configuration –
System Information section.
The DVR automatically assigns a file name to the video clip. However, you can give the video clip file a different name.
Highlight the box beside
File Name
and press the button. A virtual keyboard appears. Enter a file name for the
video you are backing up and select
Close
. The DVR will automatically add the camera number (for example “01”)
and “.exe” to the file name.
NOTE: When naming a file, you cannot use the following characters: \, /, :, *, ?, “, <, >, |.
Highlight
Include Text-In Data
and press the button. This will toggle between On and Off. When this feature is
On, you can include text-in data when copying video if the video was recorded with text-in data.
Highlight
Verify After Burning
and press the button. This will toggle between On and Off. When this feature is
On, you can verify that the data is written on the DVD RW properly.
Highlight
Use Site Info
and press the button. This will toggle between On and Off. When this feature is On, you
can add the site information to the file name for the video you are backing up.