PACOM 16-Channel Скачать руководство пользователя | Manualshive

Страница: 56 / 84

background image

User’s Manual

48

Live Monitoring Menu

Freeze

Selecting (Freeze) in the Live Monitoring menu will freeze the current image on the screen until you select again.
It is the same as pressing the (Play/Pause) button. Pressing any button except for the

MENU

,

ALARM

and

PANIC

buttons while in the Freeze mode can also exit the Freeze mode. While in the Freeze mode, the icon displays in
bottom-left corner if

Freeze

is selected in the Display setup screen (OSD tab).

Sequence

Selecting (Sequence) in the Live Monitoring menu causes the cameras to display sequentially. It is the same as
pressing and holding the

SEQUENCE

button for three seconds or longer. When in one of the multi-view formats,

pressing this button will cause the DVR to go through predefined screen layouts (Full Sequence). Or, the bottom, right
screen will display live cameras sequentially (Cameo Sequence). For example, if you press the

SEQUENCE

button

in the 2x2 format, the DVR changes pages as follows:

< Full Sequence >

< Cameo Sequence >

Selecting again in the Live Monitoring menu exits the Sequence mode. While in the Sequence mode, the icon
displays in bottom-left corner if Sequence is selected in the Display setup screen (OSD tab). If all the cameras in a page
are Off, or have lost video or are set to Covert (unless the user has authority to view covert cameras), that page will be
excluded from the sequence.

NOTE: The

Full Sequence for the full sequence monitoring and the Cameo Sequence for the cameo sequence

monitoring should be selected in the Display setup screen (Main Monitor tab).

Camera Menu

Selecting (Camera Menu) in the Live Monitoring menu displays the following Camera Menu.



Audio:

Selecting

Audio

toggles audio output On and Off.



Color Control:

Selecting

Color Control

and choosing the camera number allows you to control brightness, contrast,

hue and saturation for each camera for the selected camera if a user who has

Color Control

authority logs into the

system. It is the same as pressing and holding a camera button for a few seconds.

NOTE: It is important that cameras and monitors are correctly installed and adjusted prior to making any image

adjustments using the DVR’s controls.

Any image adjustments you make will be applied to both the live video on the monitors and the recorded
video.



Spot Monitor:

Selecting

Spot Monitor

allows you to select the camera you want to display on a Spot monitor. Refer

to the following

Spot Monitoring

section for details.

NOTE: The

Camera Menu also can be displayed by clicking the right mouse button on the screen while in the

live monitoring mode.



PTZ:

Selecting

PTZ

and choosing the camera number allows you to control the selected camera as

long as it has Pan, Tilt and Zoom capabilities. It is the same as pressing the

PTZ

button. Refer to

the following

PTZ Mode

section for details.



Zoom:

Selecting

Zoom

and choosing the camera number zooms the current image of the selected

camera on the screen. It is the same as pressing the

ZOOM

button. Selecting

Zoom

again in the

Camera Menu again exits the Zoom mode. Refer to the following

Zoom Mode

section for details.

«
...
54
55
56
57
58
...
»

Содержание 16-Channel





















































































Отзывы:

Нет отзывов

Похожие инструкции для 16-Channel

Бренд: iCatch Страницы: 12

Бренд: LT Security Страницы: 192

Бренд: Gatekeeper Страницы: 151

Бренд: Idis Страницы: 92

Бренд: SKYTRONIC Страницы: 36

Бренд: Argus Страницы: 65

Бренд: Bolide Страницы: 58

HXR-MC1 Brochure

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 4

HXR-MC1 Brochure

Бренд: Sony Страницы: 8

Бренд: Sony Страницы: 20

Бренд: Sony Страницы: 6

Бренд: Sony Страницы: 8

Бренд: Sony Страницы: 20

Бренд: Sony Страницы: 46

Бренд: Sony Страницы: 67

Бренд: Sony Страницы: 82

Бренд: Sony Страницы: 94

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды