PACOM 16-Channel, Руководство пользователя

Страница: 53 / 84

Digital Video Recorder
45
Highlight the
Actions
tab, and the System Event Actions screen displays.
Figure 64 — System Event Actions screen
The DVR can be set to react to system events. System events
can be associated with an Alarm-Out connector, sound the
DVR’s internal buzzer, and/or notify a number of different
devices.
Highlight the
Alarm-Out
box beside the desired event (
Check
Recording
,
Check Alarm-In
,
Disk Almost Full
,
Disk Full
,
Disk Bad
,
Disk Temperature
, or
Disk S.M.A.R.T.
), and
press the button. A list of Alarm Outputs appears. You
can associate as many Alarm-Outs with the Event as you wish.
If the DVR detects that event, it triggers output signals on all
the associated Alarm-Out connectors. You can also have the
DVR’s internal buzzer sound if an event is detected.
NOTE: Alarm-Out action cannot be set to System, Boot Up, Restart, Shutdown and Panic Record events.
Highlight the
Notify
box beside the desired event (
System
,
Boot Up, Restart, Shutdown, Panic Record
,
Check
Recording
,
Check Alarm-In
,
Disk Almost Full
,
Disk Full
,
Disk Bad
,
Disk Temperature
, or
Disk S.M.A.R.T.
),
and press the button. You can toggle the entire list On and Off by highlighting
Notification
and pressing the
button. You can toggle the individual items On and Off by highlighting that item and pressing the button. Highlight
OK
and press the button to accept your changes.
NOTE: Mail notify is the only option available for the System, Boot Up, Restart and Shutdown events.
For the Notify action to work, the DVR should be registered in the RAS (Remote Administration System).
Event Status
Highlight
Event Status
in the Event menu and press the button. The
Event Status
screen appears.
Figure 65 — Event Status screen.
The Event Status screen displays the status of the DVR’s
systems and inputs. Events will be highlighted, and related
channels or events will flicker for five seconds when detected.
(Alarm-In), (Motion), (Video Loss), (Video Blind)
and (Text-In) will be highlighted when each event is
detected based on the settings you made in the Alarm-In,
Motion Detection, Video Loss, Video Blind and Text-In setup
screen on the Event menu.
(Check Alarm-In) and
Check Recording
will be
highlighted when each event is detected based on the settings
you made in the System Event setup screen on the Event menu.
Panic Record
will be highlighted while the DVR is in the panic recording mode.
Disk Almost Full
will be highlighted when the DVR is not in the Recycle mode and the level of disk usage reaches
the Disk Almost Full percentage you made in the System Event setup screen on the Event menu.
Disk Full
will be
highlighted when the DVR is not in the Recycle mode and all available storage space has been used.
Disk Config
Change
will be highlighted when the DVR reboots after the hard disk drive has been replaced.
Fan Error
will be highlighted when the cooling fan to the left of the power cord on the rear panel is not working for
more than four seconds.
Highlighting the
Storage
tab will display the hard disk drive status. Refer to the
Storage
section for details.