Pacific energy FP25 Скачать руководство пользователя страница 36

Pacific Energy Limited Lifetime Warranty Wood Products

 

Pacific Energy extends the following warranty coverage to the original registered purchaser of the product: 

LTD Lifetime Coverage (10 years) 

Limited lifetime coverage is extended to the following components (parts only) porcelain finish, glass (glass for 
thermal  breakage only, not impact), plating, firebox and baffle. 

3 Year Comprehensive

 

Pacific Energy will replace or repair any part found to be defective (parts and labor) for three years from the 
date of purchase. 

This coverage includes electrical components (blowers, speed controls and thermal switches). 

Conditions: 

Your stove has been designed to perform in the harshest climates in North America. You can be confi-

dent that  under normal use your stove will be trouble free for many years.  If your stove is prematurely 
deteriorating this is  a significant indicator of improper usage, for example; excessive draft, heating to 
large an area, contaminated fuel - such as high sodium content or plastics and chemicals. Please be 
aware, these conditions may be reasons to  void your warranty.

 

For wood products 

- All installations must be installed according to all applicable local and national codes. It is the responsibility 

of the installer to ensure the unit is operating correctly at installation. 

Any part that shows in our judgment evidence of defect shall be repaired, replaced or refunded at Pacific 

Energy’s option. The defective part may be required to be returned to Pacific Energy or an accredited agent, 
transportation prepaid. 

Porcelain 

is warranted for gloss retention. Certain colors may darken when heated and return to the original 

shade when cool. 

Glass 

is warranted against thermal breakage. 

Plating 

is warranted against tarnishing. Gold plating may attain a deeper color with use. 

Exclusions

 

Limited Lifetime coverage - Lifetime coverage is limited to the repair, replacement or refund of the indicated 
parts only.  

Labor charges are not covered under the lifetime warranty. 

The following items are not included in the Liftetime Warranty: firebox rails and heat shields.

The following parts are not warranted: firebrick, gaskets and ceramic fiber blankets. 

 Waranty Information 

36

100001385_071118-40

FP25

Содержание FP25









































Отзывы: