Pacific energy FP25, Инструкция по сборке, установке и эксплуатации, Страница: 28 / 40

1. Remove the knockout panel from the top of the unit for each Remote Heat Kit you are installing (Figure 20).
2. Cut and remove the insulation directly below the opening, down to the next opening (Figure 21).
Duct Installation
REMOVE THESE KNOCKOUT
PANELS AS NEEDED
Figure 20: Knock out panels.
3. Place the Backflow Damper into the top of the unit (Figure 22). Ensure that the flap in the assembly is free
to move. (Flap should be in the normally closed position with the blower off)
4. Attach the Duct Adapter to the top of the fireplace over top of the Backflow Damper (Figure 23). Using 4
screws secure both pieces to the Fireplace's outer casing.
Figure 21: Panel with insulation removed.
Backflow damper installed
Figure 22: Backflow damper. Figure 23: Duct collar.
28
100001385_071118-40
FP25