OWL 7 LITE Series Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 61

background image

INTRODUCTION

Fiber OWL 7 series fiber optic link certifiers are high-accuracy, high-resolution, microprocessor-controlled optical power meters
capable of performing a wide variety of testing applications, from basic optical loss measurement up to dual-wavelength fiber link
certification. With a wide measurement range and NIST-traceable wavelengths, Fiber OWL 7 series certifiers are ideal for both
singlemode and multimode fiber link certification.

Enclosed in an attractive hand-held case made from high impact plastic and protected by a protective rubber boot, test readings and
graphical help screens can be viewed on the color LCD, and an intuitive 10-key keypad allows for easy data entry.

Each Fiber OWL 7 fiber link certification power meter is powered by a re-chargeable lithium polymer battery, which typically allows up
to 50 hours of continuous use. A built-in auto-shutdown feature further conserves battery life. The battery is re-charged through the
USB port via a supplied battery charger.

The intuitive built-in Link Wizard prompts the user to enter key information used to calculate standards-based link budgets for fiber
optic certification testing, and helpful diagrams guide the user through the setup and testing procedure.

Thousands of data points

tored information can be

selectively viewed, re-tested, or deleted from the device.

The data can also be downloaded to OWLView certification software to produce professional-looking formatted certification reports.
OWLView software includes a “tri-report” option that integrates power meter certification, OTDR traces, and endface analysis results
all on the same report.

with descriptive link and fiber run labels can be stored in internal memory. S

DESCRIPTION

5

APPLICATIONS

Traditional Fiber Optic Link Certification.

When used with a separate stand-alone light source, CERT (certification) mode allows

users to certify individual optical fibers at up to two wavelengths simultaneously. The Link Wizard in the Fiber OWL 7 uses attenuation
parameters from popular cabling standards to certify fiber links, and shows a link’s PASS/FAIL status right in the field.

CERT MODE

SOURCE

Using a meter and a source,

each individual fiber is certified separately.

METER

«
...
3
4
5
6
7
...
»

Содержание 7 LITE Series






























































Отзывы:

Нет отзывов

Похожие инструкции для 7 LITE Series

Бренд: T-Drill Страницы: 75

Бренд: Zeiss Страницы: 38

Бренд: Tanco Страницы: 72

Бренд: HABYS Страницы: 16

Бренд: Acterna Страницы: 72

Бренд: Panasonic Страницы: 9

Бренд: AcceleDent Страницы: 3

Бренд: Zero 88 Страницы: 32

Бренд: R.M. Young Страницы: 10

BOMAG BW 100 ADM-5

Бренд: Fayat Страницы: 216

Бренд: B medical systems Страницы: 28

Бренд: lancer Страницы: 3

Бренд: lancer Страницы: 12

Бренд: R2 Страницы: 26

Бренд: R&S Страницы: 371

Бренд: R.M. Young Страницы: 9

Бренд: Qlight Страницы: 4

Бренд: LSI Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды