E-026-3-E
30
Fig. 3-46
Setting item
Detail
Setting range
Tag
Tag number
8 alphanumeric characters
Long Tag
Tag number
32 alphanumeric characters
Descriptor
Description
16 alphanumeric characters
Message
Message
32 alphanumeric characters
Date
Production date
Positive integer of 2 digits of
day, month, and year
Device type
Device type of transmitter
132 (registered device
number)
Device id
Device ID of transmitter
Only for reference
Final assembly num
Production number
0 to 16777215
Snsr s/n
Sensor type
0 to 16777215
Polling address
HART polling address for communication (address
for multi drop)
Default value: 0
* When connecting multiple flowmeters on the
same segment, set the address other than "0"
that is not duplicative for each flowmeter.
0 to 63
Loop current mode
Loop current mode
Disabled
Enabled
Num req preambles
HART communication transmission preamble
number
Only for reference
Num resp preambles
HART communication receiving preamble number 5 to 20
Universal rev.
Universal revision of HART communication
Only for reference
Device rev.
Field device revision
Only for reference
Software rev.
Software revision
Only for reference
Hardware rev.
Hardware revision
Only for reference
(4) Click "OK" button after all settings are completed to display the message box (Fig. 3-46).
Fig. 3-47
(5) Click "OK" button. If the setting is changed to the setting value you input, the message box (Fig. 3-47)
will be displayed. Click "OK" button to complete the setting.
(6) After clicking "OK" button, the window will return to the window for inputting the item. Click "Cancel"
button to close the window for inputting the item.
To cancel the setting, click "Cancel" button during the steps (2) to (4).
