E-026-3-E
2
(3) Select and input a value for respective items. To change the unit, it is also necessary to change the
values of fluid density and fluid temperature.
Setting item
Detail
Setting range
Density unit
Fluid density unit
kg/CuMtr, lb/gal, lb/CuFt, g/ml,
lb/CuIn
Fluid density
Fluid density
0.1 to 90 (in case of g/ml)
Temp unit
Temperature unit
°C, °F
Fluid temp
Fluid temperature
-20.00 to 120.00 (in case of °C)
Reference temp
Reference temperature for temperature
compensation
Only for reference
Fluid viscosity
Fluid viscosity
0.01 to 999.99 (cpoise)
(4) Once all settings are completed, click "OK" button. Then, the message box (Fig. 3-34) will be
displayed.
Click "OK" here to change the settings to the inputted values, and to reflect the changed setting
values in the flowmeter's output. If the flowmeter's output is used to control valves or other such
parts as safety protocol, change the control loop to manual control so that the control loop cannot be
influenced by the flowmeter's output.
(6) After clicking "OK" button, the window will return to the window for inputting the item. Click "Cancel"
button to close the window for inputting the item.
To cancel the setting, click "Cancel" button during the steps (2) to (4).
Fig. 3-35
Fig. 3-34
(5) Click "OK" button. If the setting is changed to the setting value you input, the message box (Fig. 3-35)
will be displayed. Click "OK" button to complete the setting.
