E-026-3-E
2
Fig. 3-32
(6) After clicking "OK" button, the window will return to the window for inputting the item. Click "Cancel"
button to close the window for inputting the item.
To cancel the setting, click "Cancel" button during the steps (2) to (4).
3.6.2.2 Fluid (parameter setting related to fluid)
(1) Click "Setup (S)" from the menu, and then click on "Fluid" from the drop-down list of "Fld dev vars".
(2) The following window (Fig. 3-33) will be displayed. Here, set the parameter related to fluid.
Fig. 3-33
Click "OK" button. If the value is changed to the selected setting value, the message box (Fig. 3-32)
will be displayed. Click "OK" button to complete the setting.
