E-026-3-E
0
(3) Click the arrow on right side as shown in Fig. 3-6, and select the port for which connection is
changed from the drop-down list.
It is possible to check whether the port is connected or not with the device manager screen shown in
Fig. 3-7.
Fig. 3-6
Fig. 3-7
(4) After the selection is completed, click "OK" button. After clicking the button, the value will be
changed to the setting value you select and the window will disappear.
If you want to cancel the setting, click "Cancel" button.
(5) The standard setting is "COM1".
* When USB serial port is used, select "COM (port number) (USB)".
* When USB serial port is used, set up the included driver preliminarily and use it in connectable status.
(6) For the setting of communication speed, select "HART".