E-026-3-E
2
(4) Click "OK" button after all settings are completed. Then the message box (Fig. 3-42) will be displayed.
Click "OK" here to change the settings to the inputted values, and to reflect the changed setting
values in the flowmeter's output. If the flowmeter's output is used to control valves or other such
parts as safety protocol, change the control loop to manual control so that the control loop cannot be
influenced by the flowmeter's output.
Fig. 3-42
(5) Click "OK" button. If the value is changed to the selected setting value, the message box (Fig. 3-43)
will be displayed. Click "OK" button to complete the setting.
Fig. 3-43
(6) After clicking "OK" button, the window will return to the window for inputting the item. Click "Cancel"
button to close the window for inputting the item.
To cancel the setting, click "Cancel" button during the steps (2) to (4).
