ORTAL Clear 130 LS, Инструкция по установке и эксплуатации

Страница: 4 / 67

4
Electrical 51
Electrical Requirements 51
Power Outage 51
Pairing the Remote and Receiver 51
Wiring Diagrams 52
Carbon Monoxide Detector Wiring Diagrams 58
Home Automation Wiring Diagram 60
Interior Design Media 60
Media Placement Guidelines 61
Glass Media Placement 61
Stone Media Placement 61
Log Media Placement 62
Operation 63
10-Button Remote Control Handset 63
Wall Switch 64
myFire App 65
Fireplace Maintenance 66
General Maintenance 66
“
→
” Denotes new or updated information.
Product Information
Certification
Built-In Model fireplaces have been tested and approved by CSA Group for safety and efficiency for use with Natural Gas (NG) and
Propane (LP) only, and NOT for use with solid fuels. CSA Group is approved by the American National Standards Institute
(ANSI) as an Accredited Standards Developer.
Certification Standard:
ANSI Z21.88/CSA 2.33 – 2016: Vented Gas Fireplace Heaters
ANSI Z21.50/CSA 2.22 – 2016: Decorative Vented Gas Fireplaces
Products:
CLASS 2901 84: DOMESTIC HEATERS (GAS) Vented Fireplace: Certified to US Standard
CLASS 2901 04: DOMESTIC HEATERS (GAS) Vented Fireplace
The fireplaces are permitted for indoor use only. “Indoor” is defined as a conditioned space. The fireplaces are not approved for
outdoor or partial outdoor installation.
Exception: Tunnel models with the Ortal “Indoor-Outdoor Kit” are approved for partial (indoor-outdoor) outdoor
installation.
The fireplaces must be installed while maintaining required clearances. Installation is recommended in living spaces such as
bedrooms, living rooms, great rooms, etc. The fireplaces are not approved for closet installation. The fireplace must be installed
according to Ortal requirements in addition to any local codes that may apply, such as USA: ANSI Z223.1/NFPA 54, Canada: CSA
B149.
IMPORTANT – PLEASE READ:

It is the responsibility of the fireplace dealer and installer to ensure that this fireplace is installed and framed in
compliance with these instructions and all applicable codes.

Before starting, take careful note of ALL the WARNINGS in this manual.

Consult the authority having jurisdiction to determine the need for a permit prior to starting the installation.
Patent Pending for screen barrier glass bracket: USSN 60/040,074