ORiNG DGS-7084GCP-AIO_S SERIES Скачать руководство пользователя страница 98

Страница: 98 / 138

DGS-7084GCP-AIO_S SERIES User’s Manual

ORing Industrial Networking Corp

Label

Description

Mode

Indicates if 802.1X and MAC-based authentication is globally

enabled or disabled on the switch. If globally disabled, all ports

are allowed forwarding of frames.

Reauthentication

Enabled

If checked, clients are reauthenticated after the interval specified

by the Reauthentication Period. Reauthentication for

802.1X-enabled ports can be used to detect if a new device is

plugged into a switch port.

For MAC-based ports, reauthentication is only useful if the

RADIUS server configuration has changed. It does not involve

communication between the switch and the client, and therefore

doesn't imply that a client is still present on a port (see Age Period

below).

Reauthentication

Period

Determines the period, in seconds, after which a connected client

must be reauthenticated. This is only active if the

Reauthentication Enabled checkbox is checked. Valid values are

in the range 1 to 3600 seconds.

EAP Timeout

Determines the time the switch shall wait for the supplicant

response before retransmitting a packet. Valid values are in the

range 1 to 255 seconds. This has no effect for MAC-based ports.

Age Period

This setting applies to ports running MAC-based authentication,

Содержание DGS-7084GCP-AIO_S SERIES











































































































































Результаты поиска

Содержание DGS-7084GCP-AIO_S SERIES

Отзывы:

ORiNG DGS-7084GCP-AIO_S SERIES, Руководство пользователя, Страница: 98 / 138

Результаты поиска

Содержание DGS-7084GCP-AIO_S SERIES

Отзывы: