ORiNG DGS-7084GCP-AIO_S SERIES Скачать руководство пользователя страница 107

Страница: 107 / 138

DGS-7084GCP-AIO_S SERIES User’s Manual

ORing Industrial Networking Corp

106

Label

Description

The RADIUS server number. Click to navigate to detailed

statistics for this server.

IP Address

The IP address and UDP port number (in <IP Address>:<UDP

Port> notation) of this server.

State

The current state of the server. This field takes one of the

following values:

Disabled: The server is disabled.

Not Ready: The server is enabled, but IP communication is not

yet up and running.

Ready: The server is enabled, IP communication is up and

running, and the RADIUS module is ready to accept access

attempts.

Dead (X seconds left): Access attempts were made to this server,

but it did not reply within the configured timeout. The server has

temporarily been disabled, but will get re-enabled when the

dead-time expires. The number of seconds left before this occurs

is displayed in parentheses. This state is only reachable when

more than one server is enabled.

Содержание DGS-7084GCP-AIO_S SERIES











































































































































Результаты поиска

Содержание DGS-7084GCP-AIO_S SERIES

Отзывы:

ORiNG DGS-7084GCP-AIO_S SERIES, Руководство пользователя, Страница: 107 / 138

Результаты поиска

Содержание DGS-7084GCP-AIO_S SERIES

Отзывы: