ORiNG DGS-7084GCP-AIO_S SERIES Скачать руководство пользователя страница 86

Страница: 86 / 138

DGS-7084GCP-AIO_S SERIES User’s Manual

ORing Industrial Networking Corp

hexadecimal).

ARP: Only ARP frames can match this ACE. Notice the ARP frames

won't match the ACE with Ethernet type.

IPv4: Only IPv4 frames can match this ACE. Notice the IPv4 frames

won't match the ACE with Ethernet type.

Action

Specify the action to take with a frame that hits this ACE.

Permit: The frame that hits this ACE is granted permission for the

ACE operation.

Deny: The frame that hits this ACE is dropped.

Rate Limiter

Specify the rate limiter in number of base units. The allowed range is

1 to 15. Disabled indicates that the rate limiter operation is disabled.

Port Copy

Frames that hit the ACE are copied to the port number specified

here. The allowed range is the same as the switch port number

range. Disabled indicates that the port copy operation is disabled.

Logging

Specify the logging operation of the ACE. The allowed values are:

Enabled: Frames matching the ACE are stored in the System Log.

Disabled: Frames matching the ACE are not logged.

Please note that the System Log memory size and logging rate is

limited.

Shutdown

Specify the port shut down operation of the ACE. The allowed values

are:

Enabled: If a frame matches the ACE, the ingress port will be

disabled.

Disabled: Port shut down is disabled for the ACE.

Counter

The counter indicates the number of times the ACE was hit by a

frame.

Label

Description

Содержание DGS-7084GCP-AIO_S SERIES











































































































































Результаты поиска

Содержание DGS-7084GCP-AIO_S SERIES

Отзывы:

ORiNG DGS-7084GCP-AIO_S SERIES, Руководство пользователя, Страница: 86 / 138

Результаты поиска

Содержание DGS-7084GCP-AIO_S SERIES

Отзывы: