ORiNG DGS-7084GCP-AIO_S SERIES Скачать руководство пользователя страница 89

Страница: 89 / 138

DGS-7084GCP-AIO_S SERIES User’s Manual

ORing Industrial Networking Corp

IP TTL

Specify the Time-to-Live settings for this ACE.

zero: IPv4 frames with a Time-to-Live field greater than zero must not

be able to match this entry.

non-zero: IPv4 frames with a Time-to-Live field greater than zero

must be able to match this entry.

Any: Any value is allowed ("don't-care").

IP Fragment

Specify the fragment offset settings for this ACE. This involves the

settings for the More Fragments (MF) bit and the Fragment Offset

(FRAG OFFSET) field for an IPv4 frame.

No: IPv4 frames where the MF bit is set or the FRAG OFFSET field is

greater than zero must not be able to match this entry.

Yes: IPv4 frames where the MF bit is set or the FRAG OFFSET field

is greater than zero must be able to match this entry.

Any: Any value is allowed ("don't-care").

IP Option

Specify the options flag setting for this ACE.

No: IPv4 frames where the options flag is set must not be able to

match this entry.

Yes: IPv4 frames where the options flag is set must be able to match

this entry.

Any: Any value is allowed ("don't-care").

SIP Filter

Specify the source IP filter for this ACE.

Any: No source IP filter is specified. (Source IP filter is "don't-care".)

Host: Source IP filter is set to Host. Specify the source IP address in

the SIP Address field that appears.

Network: Source IP filter is set to Network. Specify the source IP

address and source IP mask in the SIP Address and SIP Mask fields

that appear.

SIP Address

When "Host" or "Network" is selected for the source IP filter, you can

enter a specific SIP address in dotted decimal notation.

SIP Mask

When "Network" is selected for the source IP filter, you can enter a

specific SIP mask in dotted decimal notation.

DIP Filter

Specify the destination IP filter for this ACE.

Any: No destination IP filter is specified. (Destination IP filter is

"don't-care".)

Host: Destination IP filter is set to Host. Specify the destination IP

address in the DIP Address field that appears.

Network: Destination IP filter is set to Network. Specify the

Содержание DGS-7084GCP-AIO_S SERIES











































































































































Результаты поиска

Содержание DGS-7084GCP-AIO_S SERIES

Отзывы:

ORiNG DGS-7084GCP-AIO_S SERIES, Руководство пользователя, Страница: 89 / 138

Результаты поиска

Содержание DGS-7084GCP-AIO_S SERIES

Отзывы: