ORiNG DGS-7084GCP-AIO_S SERIES Скачать руководство пользователя страница 30

Страница: 30 / 138

DGS-7084GCP-AIO_S SERIES User’s Manual

ORing Industrial Networking Corp

Configured Link

Speed

Select any available link speed for the given switch port.

Auto Speed selects the highest speed that is compatible with a

link partner.

Disabled disables the switch port operation.

Flow Control

When Auto Speed is selected for a port, this section indicates the

flow control capability that is advertised to the link partner.

When a fixed-speed setting is selected, that is what is used. The

Current Rx column indicates whether pause frames on the port

are obeyed, and the Current Tx column indicates whether pause

frames on the port are transmitted. The Rx and Tx settings are

determined by the result of the last Auto-Negotiation.

Check the configured column to use flow control. This setting is

related to the setting for Configured Link Speed.

Maximum Frame

Enter the maximum frame size allowed for the switch port,

including FCS. The allowed range is 1518 bytes to 9600 bytes.

Excessive Collision

Mode

Configure port transmit collision behavior.

Discard: Discard frame after 16 collisions (default).

Restart: Restart back-off algorithm after 16 collisions.

Power Control

The Usage column shows the current percentage of the power

consumption per port. The Configured column allows for changing

the power savings mode parameters per port.

Disabled: All power savings mechanisms disabled.

ActiPHY: Link down power savings enabled.

PerfectReach: Link up power savings enabled.

Enabled: Both link up and link down power savings enabled.

Total Power Usage

Total power usage in board, measured in percent.

Click to save changes.

Click to undo any changes made locally and revert to previously

saved values.

Click to refresh the page. Any changes made locally will be

undone.

Содержание DGS-7084GCP-AIO_S SERIES











































































































































Результаты поиска

Содержание DGS-7084GCP-AIO_S SERIES

Отзывы:

ORiNG DGS-7084GCP-AIO_S SERIES, Руководство пользователя, Страница: 30 / 138

Результаты поиска

Содержание DGS-7084GCP-AIO_S SERIES

Отзывы: