ORiNG DGS-7084GCP-AIO_S SERIES Скачать руководство пользователя страница 119

Страница: 119 / 138

DGS-7084GCP-AIO_S SERIES User’s Manual

ORing Industrial Networking Corp

118

Label

Description

Port

The logical port for the settings contained in the same row.

Mode

Select mirror mode.

Rx only : Frames received at this port are mirrored to the mirror port.

Frames transmitted are not mirrored.

Tx only :Frames transmitted from this port are mirrored to the mirror

port. Frames received are not mirrored.

Disabled : Neither frames transmitted nor frames received are

mirrored.

Enabled : Frames received and frames transmitted are mirrored to

the mirror port.

Note: For a given port, a frame is only transmitted once. It is

therefore not possible to mirror Tx frames for the mirror port.

Because of this, mode for the selected mirror port is limited to

Disabled or Rx only.

Содержание DGS-7084GCP-AIO_S SERIES











































































































































Результаты поиска

Содержание DGS-7084GCP-AIO_S SERIES

Отзывы:

ORiNG DGS-7084GCP-AIO_S SERIES, Руководство пользователя, Страница: 119 / 138

Результаты поиска

Содержание DGS-7084GCP-AIO_S SERIES

Отзывы: