ORiNG DGS-7084GCP-AIO_S SERIES Скачать руководство пользователя страница 32

Страница: 32 / 138

DGS-7084GCP-AIO_S SERIES User’s Manual

ORing Industrial Networking Corp

Click to undo any changes made locally and revert to previously

saved values.

4.1.4.3 Port

Trunk

4.1.4.3.1 Trunk

Configuration

This page is used to configure the Aggregation hash mode and the aggregation group.

Label

Description

Source MAC Address

The Source MAC address can be used to calculate the

destination port for the frame. Check to enable the use of the

Source MAC address, or uncheck to disable. By default, Source

MAC Address is enabled.

Destination MAC

Address

The Destination MAC Address can be used to calculate the

destination port for the frame. Check to enable the use of the

Destination MAC Address, or uncheck to disable. By default,

Destination MAC Address is disabled.

IP Address

The IP address can be used to calculate the destination port for

the frame. Check to enable the use of the IP Address, or uncheck

to disable. By default, IP Address is enabled.

TCP/UDP Port

Number

The TCP/UDP port number can be used to calculate the

destination port for the frame. Check to enable the use of the

TCP/UDP Port Number, or uncheck to disable. By default,

TCP/UDP Port Number is enabled.

Содержание DGS-7084GCP-AIO_S SERIES











































































































































Результаты поиска

Содержание DGS-7084GCP-AIO_S SERIES

Отзывы:

ORiNG DGS-7084GCP-AIO_S SERIES, Руководство пользователя, Страница: 32 / 138

Результаты поиска

Содержание DGS-7084GCP-AIO_S SERIES

Отзывы: