ORiNG DGS-7084GCP-AIO_S SERIES Скачать руководство пользователя страница 78

Страница: 78 / 138

DGS-7084GCP-AIO_S SERIES User’s Manual

ORing Industrial Networking Corp

Label

Description

Mode

Indicates the per-port Device Binding operation. Possible modes are:

---: Disable.

Scan: Scan IP/MAC automatically, but no binding function.

Binding: Enable binding function. Under this mode, any IP/MAC

doesn't match the entry will not be allowed to access the network.

Shutdown: Shutdown the port (No Link).

Alive Check

Active

Enable/Disable Alive Check. When enabled, switch will ping the

device continually.

Alive Check Satus

Indicates the Alive Check status. Possible statuses are:

---: Disable.

Got Reply: Got ping reply from device, that means the device is still

alive.

Lost Reply: Lost ping reply from device, that means the device might

have been hanged.

Stream Check

Active

Enable/Disable Stream Check. When enabled, switch will detect the

stream change(getting low) from device.

Stream Check

Status

Indicates the Stream Check status. Possible statuses are:

---: Disable.

Normal: The stream is normal.

Low: The stream is getting low.

DDoS Prevention

Acton

Enable/Disable DDOS Prevention. When enabled, switch will monitor

the device to against DDOS attack (from device).

DDoS Prevention

Status

Indicates the DDOS Prevention status. Possible statuses are:

---: Disable.

Analysing: Analyse the packet throughput for initialization.

Running: Function ready.

Attacked: DDOS attack happened.

Device IP Address

Specify the IP Address of device.

Device MAC

Address

Specify the MAC Address of device.

Содержание DGS-7084GCP-AIO_S SERIES











































































































































Результаты поиска

Содержание DGS-7084GCP-AIO_S SERIES

Отзывы:

ORiNG DGS-7084GCP-AIO_S SERIES, Руководство пользователя, Страница: 78 / 138

Результаты поиска

Содержание DGS-7084GCP-AIO_S SERIES

Отзывы: