ORiNG DGS-7084GCP-AIO_S SERIES Скачать руководство пользователя страница 50

Страница: 50 / 138

DGS-7084GCP-AIO_S SERIES User’s Manual

ORing Industrial Networking Corp

The following table describes the labels in this screen.

Label

Description

Active

Activate the fast recovery mode.

port

Port can be configured as 12 priorities. Only the port with highest

priority will be the active port. 1st Priority is the highest.

Apply

Click “

Apply

” to activate the configurations.

4.1.6 VLAN
4.1.6.1 VLAN Membership Configuration

The VLAN membership configuration for the selected stack switch unit switch can be

monitored and modified here. Up to 64 VLANs are supported. This page allows for adding and

deleting VLANs as well as adding and deleting port members of each VLAN.

Label

Description

Delete

Check to delete the entry. It will be deleted during the next save.

VLAN ID

The VLAN ID for the entry.

MAC Address

The MAC address for the entry.

Port Members

Checkmarks indicate which ports are members of the entry.

Check or uncheck as needed to modify the entry.

Adding a New Static

Entry

Click

to add a new VLAN ID. An empty

row is added to the table, and the VLAN can be configured as

needed. Legal values for a VLAN ID are 1 through 4095.

The VLAN is enabled on the selected stack switch unit when you

Содержание DGS-7084GCP-AIO_S SERIES











































































































































Результаты поиска

Содержание DGS-7084GCP-AIO_S SERIES

Отзывы:

ORiNG DGS-7084GCP-AIO_S SERIES, Руководство пользователя, Страница: 50 / 138

Результаты поиска

Содержание DGS-7084GCP-AIO_S SERIES

Отзывы: