8
Positioning Operation
Speed
Time
Start
Command
Operating Data
No. 1
Operating Data
No. 2
Speed
Time
Operating Data
No. 1
Operating Data
No. 2
Start
Command
Speed
Time
Dwell
Time
Operating Data
No. 1
Operating Data
No. 2
Start
Command
<Operation Functions>
●
Independent Operation
●
Linked Operation
●
Linked Operation 2
●
Group Transmission Function
(via RS-485 communication or network converter)
You can configure a group of multiple axes connected using
RS-485 communication and send commands by group.
You can also perform simultaneous start and simultaneous
operation for multiple axes.
●
Teaching Function
Teaching can be performed using the
OPX-2A
control module
(sold separately) or the
MEXE02
data setting software
✽
. Move the
table to the target position and store the position data at this time
as the positioning data.
✽
The data setting software can be downloaded from the Oriental Motor website. Oriental Motor
can also provide a CD-ROM. For details, please contact the nearby Oriental Motor sales office.
●
PLS-OUT Output Function
●
Synchronous Operation Possible
This outputs signals with the same number of pulses and pulse
speed as the command value.
The PLS-OUT signal and DIR-OUT signal (rotation direction signal)
can be input to another driver to drive the actuator for another
axis.
●
Used for Position Count
The command position to the actuator can be checked by
counting the output signals.
●
2-Sensor Mode
●
3-Sensor Mode
●
Position Preset
<Start Methods>
●
Operating Data Selection Method
●
Sequential Positioning
Return-To-Home Operation
Continuous Operation
− Direction
+ Direction
Axis 1 (Driven axis)
Time
FWD Input
RVS Input
M0
∼
M5 Input
—VR
—VS
—VS
—VR
+
LS
−
LS
−
Side
+
Side
HOMES
—VR
—VS
—VS
—VR
+
LS
−
LS
−
Side
+
Side
0 axis Start the positioning operation
0 Axis (Main shaft)
Actuator Movement
1 Axis (Driven shaft)
Actuator Movement
2 Axis (Driven shaft)
Actuator Movement
Operation Command
(RS-485 communication)
Driver Features [2]
