5
3 Types to Select According to Your Application
Product Line
Standard Type
Guide Type
Table Type
External View
This type can be used incorporated
directly into your equipment or with
a load transfer guide outside the
actuator.
This type has a guide attached with
which the load can be fixed to the
actuator.
Direct load installation is easy.
This type has a guide attached with
which the load can be fixed to the
actuator.
Load installation and main
unit installation are easy and
transportation is possible as the top of
moving parts are kept low.
Stroke [mm]
25
∼
100
25
∼
50
25, 30
Thrust Force [N]
15
∼
300
15
∼
300
15, 30
Typical Applications
For other applications, refer
to Page 11.
[X-Y table]
[Focusing drive for a camera]
✽
Use the electromagnetic
brake type for
vertical direction drive.
[Spectrometer]
With Adjusting Knob
Applications The X-Y stage position can be
finely adjusted/moved when the
power is OFF.
The load position can be adjusted manually
when the power is OFF.
This function is useful during maintenance of
the equipment.
Electromagnetic Brake Type
Applications Used to hold the CCD
camera's Z-position
when the power is OFF.
The load position can be held when the power
is OFF.
Since the load will not fall in the event of a
power failure or disconnection, you can safely
use equipment in which the load moves at
vertical direction.
The standard type
DRL28
,
DRL42
,
and
DRL60
are also available with a
long stroke.
■
Additional Functions
Each type is available with an "electromagnetic brake" or "adjusting knob" as additional functions.
