29
Setting
This section covers how to set driver functions and adjust motor currents.
You can set the automatic current-cutback function, step angle and pulse input mode or adjust motor
currents using the various switches ( jumper sockets ) on the driver.
Automatic current-cutback function C.C./A.C.D.
Step angle switch FULL/HALF
Potentiometer for adjusting the motor operating current RUN VR
Potentiometere for adjusting the motor standstill current STOP VR
Function setting jumper sockets
1 2 3 4
OF
F
VEXTA
C.C.+
C.C.-
ACD
F/H
1P/2P
24/36V
RUN
VR
STOP
VR
P0W
Power supply voltage switch 24/36V
Pulse input mode switch 1P/2P
Step angle switch F/H
Automatic current-cutback function switch A.C.D.
Potentiometer for adjusting the motor operating current RUN VR
Potentiometer for adjusting the motor standstill current STOP VR
CSD2109-P, CSD2112-P, CSD2120-P
CSD2120P2, CSD2130P, CSD2140P, CSD2145P
●
When changing the setting of a driver function, be sure to turn off the
power supply beforehand. The new setting becomes effective when
the power is turned on again.
●
The driver may malfunction or become damaged due to the effects of
static electricity. While the driver is receiving current, handle the
driver carefully and do not come near or touch the driver.
●
When operating a function switch, jumper socket or current
adjustment potentiometer, be sure to use an insulated screwdriver.
NOTE