10
Installation
Connection
This product is designed for incorporation into industrial equipment. Touching the product during
operation may result in bodily injury or property damage, since the output shaft is rotating and the surface
remains very hot.
To prevent bodily injury or damage to the product, be sure the product is handled and operated only by
qualified personnel familiar with operations involving electronic equipment.
The precautions provided in this section are intended to ensure safe and correct use of the product,
thereby preventing damage or injury to the user or other personnel. Fully understand the meaning of
each item before using the product.
●
Install the motor and driver in an enclosure so
that the operator cannot touch them. Direct
contact may result in injury.
●
Always use the driver with a power source of the
rated voltage. Failure to do so may result in fire
or electric shock.
●
For the driver, use a DC power source with
reinforced insulation provided on the primary and
secondary sides. Failure to do so may result in
electric shock.
●
The digital I / O part does not have reinforced
insulation. For the digital I / O, use a DC power
source with reinforced insulation provided on the
primary and secondary sides. Failure to do so
may result in electric shock.
●
Connect the product correctly and securely
according to the wiring diagram. Failure to do so
may result in fire.
●
Do not forcibly bend, pull or pinch the cable.
Doing so may result in fire.
●
Assign qualified personnel the task of installing,
wiring, operating/controlling, inspecting and
troubleshooting the product. Failure to do so
may result in fire or injury.
●
Provide a measure to retain the position of the
movable part of the equipment when the product
is used in a vertical application. The motor loses
its holding capability when the power is cut off.
Without an appropriate measure the movable
part will descend, resulting in injury or equipment
damage.
Warning
Handling the product without observing
the instructions that accompany a
“ Warning ” symbol may result in death
or serious bodily injury.
Caution
Handling the product without observing
the instructions that accompany a
“ Caution ” symbol may result in bodily
injury or property damage.
These notes appear throughout the
manual and describe items that must
be observed by the user in certain
situations to ensure correct use of the
product.
NOTE
General
Warning
●
Do not use the product in an atmosphere
containing explosive, flammable or corrosive
gases, in a place exposed to water, or near
flammable objects. Doing so may result in fire or
injury.
Safety precautions